Mounted fuse blocks

I mounted the battery and main fuse blocks. I'll get pictures to show location later. Battery block is on back side of subpanel on passenger side. Main fuse block is mounted on the inboard side of the passenger side subpanel support rib. This gets it out of the way for the most part but still leaves me access if I need it later on. I just couldn't bring myself to mount it in a place that would be very difficult to access later. This location also gives me lots of options for mounting adel clamps for supporting wires.





Also drilled a hole on each side of the fuse, just forward of the wing spar opening to run the low-level fuel warning wire.

I replaced some of the SB625-7's with SB625-8's which have a slightly larger ID.

I set the fuel/brake line center cover in place to see how wires get routed out from underneath it up to the panel. Looks like there is room on each side to come out and up. You could also put some holes in the little cover that sits over the top of the fuel pump.

(Time: 45 mins)