Transponder online

Hooked up the power/ground wires for the transponder and terminated the ends on the antenna. Hooked the wires up and slid the unit in tray and turned it on. Discovered I needed the 14v lighting circuit wired in to get any indication it was on, so I temporarily stuck it on a fuse.. appears to work! The transponder also feeds the encoder it's power, so I confirmed the encoder was feeding the GPS altitude data and it appears it is.



I obviously need to get the dimmer circuit installed.... and the audio panel will be next followed by the nav/com. Weds. is movie night so no more work until Thursday.

(Time: 1.5 Hours; 82.5 Total to date)