Wing root wiring / Lights wiring

With the wings on, I put terminals on the root ends and attached them to the terminal blocks under the seats. I also fished the low-level fuel sensor wiring up to the panel and hooked it up.

I secured the starter and alternator wiring with some adel clamps using the bolts on the oil sump. Wired the alternator field wire.

I wired up the tail strobe/position light and also the left wingtip lights.

(Time: 4 Hours)

Tach sensor

Wired up Van's tach sensor to the EIS4000. Red = 12v, Black = Ground, White = Data.

Bill and I tried to test my mag wiring but couldn't figure it out. Guess I'll know when I try and start the engine. :-)

(Time: 1 Hours)