Fuel tank float
Kinda piddled around tonight playing with the rear baffle to see how it fit. I also finished bending the float wire. (The float wire is steel and requires a hack saw to cut!)

Fuel sensor float

I can now understand why the gauges are accurate with low fuel but not full tanks. In order to get the float 1/8" from the bottom of the tank like the plans state, the float is about 3/4" from the top. No biggie, would much rather it be accurate down low then up high.

(Time: 1 hours)
- posted by Matthew @ 11/10/2003 09:40:14 PM