Construction log of my RV-9A fuselage
Archives
10/01/2003 - 10/31/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
07/01/2004 - 07/31/2004
08/01/2004 - 08/31/2004
09/01/2004 - 09/30/2004
10/01/2004 - 10/31/2004
11/01/2004 - 11/30/2004
Current Entry
Home Page
Build hours: 404
10/01/2003 - 10/31/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
07/01/2004 - 07/31/2004
08/01/2004 - 08/31/2004
09/01/2004 - 09/30/2004
10/01/2004 - 10/31/2004
11/01/2004 - 11/30/2004
Current Entry
Home Page
Build hours: 404
RV-9A Fuselage Construction
Wednesday, September 08, 2004
Drilling the F-631 roll bar
I drilled the 631B straps to the aft half of the roll bar. The first one went pretty good. The top strip really wanted to not sit down in the channel once it started going around the curve. I did what I could to keep it down. I shaved of some of the edge so the top half would sit far enough down to get the 1.5" thickness.
Bottom strip drilled and cleco'd
Top strip drilled in place.
Next I need to put the forward halfs of the roll bar on and drill them.
(Time: 2.5 hrs)
Comments:
Post a Comment
