Construction log of my RV-9A fuselage
Archives
10/01/2003 - 10/31/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
07/01/2004 - 07/31/2004
08/01/2004 - 08/31/2004
09/01/2004 - 09/30/2004
10/01/2004 - 10/31/2004
11/01/2004 - 11/30/2004
Current Entry
Home Page
Build hours: 404
10/01/2003 - 10/31/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
07/01/2004 - 07/31/2004
08/01/2004 - 08/31/2004
09/01/2004 - 09/30/2004
10/01/2004 - 10/31/2004
11/01/2004 - 11/30/2004
Current Entry
Home Page
Build hours: 404
RV-9A Fuselage Construction
Thursday, September 16, 2004
Rollbar riveting
Started riveting the rollbar together. Riveted the two forward halves and then the two splice strips. I riveted the strips with the halves clamped to the table to keep it as flat as possible.
I riveted the aft halves together. I need to drill the 631D angle to it then I can complete the rollbar assembly. (Will do on Saturday)
(Time: 2 hrs)
Comments:
Post a Comment
