Construction log of my RV-9A fuselage
Archives
10/01/2003 - 10/31/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
07/01/2004 - 07/31/2004
08/01/2004 - 08/31/2004
09/01/2004 - 09/30/2004
10/01/2004 - 10/31/2004
11/01/2004 - 11/30/2004
Current Entry
Home Page
Build hours: 404
10/01/2003 - 10/31/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
07/01/2004 - 07/31/2004
08/01/2004 - 08/31/2004
09/01/2004 - 09/30/2004
10/01/2004 - 10/31/2004
11/01/2004 - 11/30/2004
Current Entry
Home Page
Build hours: 404
RV-9A Fuselage Construction
Wednesday, October 06, 2004
Manual aileron trim control
Pulled out the manual aileron trim bag and assembled it. Pretty straight forward. Had to drill out a couple of nuplates on the seat ribs... and also the nutplate on the seat pan, as it was orientated in a way that interfered with the trim bracket.
Parts to make trim control
Nuplate on seat pan that needs rotated 90 degrees.
Top view after assembly.
Bottom view after assembly.
Installed - no springs yet.
PS - Inventory your parts bag when you get the kit.. I'm missing a VA-116 spring.
(Time: 2 hrs)
Comments:
Post a Comment
