Details the construction of my RV-9A wings.
Archives
05/01/2003 - 05/31/2003
07/01/2003 - 07/31/2003
08/01/2003 - 08/31/2003
09/01/2003 - 09/30/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
04/01/2004 - 04/30/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
10/01/2004 - 10/31/2004
12/01/2004 - 12/31/2004
Build Hours: 280
05/01/2003 - 05/31/2003
07/01/2003 - 07/31/2003
08/01/2003 - 08/31/2003
09/01/2003 - 09/30/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
04/01/2004 - 04/30/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
10/01/2004 - 10/31/2004
12/01/2004 - 12/31/2004
Build Hours: 280
Current Entry
Fuel Tanks
Fuselage
Home Page
RV-9A Wing Construction Log
Monday, December 15, 2003
Start riveting left aileron
Tonight I started riveting the skin-to-spar rivets on the left aileron. Started with the top side first. I used the edge roller on the top side of the nose skin to help it sit flush but I didn't quite get it rolled enough. The nose skin doesn't quite mate with the top skin. It's miniscule.. but there. Since I usually borrow Ray's edge roller, I didn't have it handy, so I just finished the top row and started in on the bottom side. So my tip for the night is to really put an bent edge on the nose skin, top side. (Bottom side doesn't need any.)
Bottom side rivets
Top side rivets
Small amount of puckering.. fuzzy picture.
(Time: 1.5 hours)
