Details the construction of my RV-9A wings.
Archives
05/01/2003 - 05/31/2003
07/01/2003 - 07/31/2003
08/01/2003 - 08/31/2003
09/01/2003 - 09/30/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
04/01/2004 - 04/30/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
10/01/2004 - 10/31/2004
12/01/2004 - 12/31/2004
Build Hours: 280
05/01/2003 - 05/31/2003
07/01/2003 - 07/31/2003
08/01/2003 - 08/31/2003
09/01/2003 - 09/30/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
04/01/2004 - 04/30/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
10/01/2004 - 10/31/2004
12/01/2004 - 12/31/2004
Build Hours: 280
Current Entry
Fuel Tanks
Fuselage
Home Page
RV-9A Wing Construction Log
Wednesday, December 17, 2003
Started right aileron
I finished drilling the last few holes in the trailing edge of the left aileron and deburred them all. I was going to drill the wedge but my drill press has a wobble in it. I diagnosed the problem as an out of round chuck. I need to order a replacement from Crafstman.
So I reassembled the right aileron and started the riveting process.
(Time: 2 hours)
