Details the construction of my RV-9A wings.
Archives
05/01/2003 - 05/31/2003
07/01/2003 - 07/31/2003
08/01/2003 - 08/31/2003
09/01/2003 - 09/30/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
04/01/2004 - 04/30/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
10/01/2004 - 10/31/2004
12/01/2004 - 12/31/2004
Build Hours: 280
05/01/2003 - 05/31/2003
07/01/2003 - 07/31/2003
08/01/2003 - 08/31/2003
09/01/2003 - 09/30/2003
11/01/2003 - 11/30/2003
12/01/2003 - 12/31/2003
01/01/2004 - 01/31/2004
02/01/2004 - 02/29/2004
03/01/2004 - 03/31/2004
04/01/2004 - 04/30/2004
05/01/2004 - 05/31/2004
06/01/2004 - 06/30/2004
10/01/2004 - 10/31/2004
12/01/2004 - 12/31/2004
Build Hours: 280
Current Entry
Fuel Tanks
Fuselage
Home Page
RV-9A Wing Construction Log
Saturday, June 05, 2004
Top skin riveting
I inserted and taped all the holes in the top skin that didn't have cleco's in them. I recruited Jenny to come out and help me set them all. I used the new Avery back rivet set and Jenny held the bucking bar. The new Avery set is very nice.. and much better than that old thing they had. It takes a bit of practice to get it positioned right to drive a good rivet.
Make sure your clamps are good and tight before you start riveting. I noticed after we were done that nearly all the clamps had come loose from riveting. Oh well.. can't do anything about it now.
Pulled all the cleco's out, peeled of the rivet tape and put in the rest of the rivets, then called it a night.
(Time: 4.5 hours)
